OPEN-HARDWARE LICENCE NOTICE
Copyright © 2026 ALM Made
The hardware design files and plans associated with this project — including the 3D solid model and 2D technical drawings — are licensed under the CERN Open Hardware Licence Version 2 – Strongly Reciprocal (CERN-OHL-S-2.0).
The fabrication instructions and assembly instructions are licensed under the Creative Commons Attribution-ShareAlike 4.0 International licence (CC BY-SA 4.0).
The brochure and any other promotional or marketing material are not covered by the above licences. All rights are reserved. The brochure may be viewed for informational purposes but may not be copied, modified, redistributed, or used for any commercial or non-commercial purpose without separate written permission from ALM Made.
The applicable licence texts are available at:
CERN-OHL-S-2.0:
https://ohwr.org/cern_ohl_s_v2.txt
CC BY-SA 4.0:
https://creativecommons.org/licenses/by-sa/4.0/
Attribution should be made to:
ALM Made
https://almmade.com/
Where reasonably practicable, attribution should include the project name, the original source location, and a statement identifying any modifications made to the materials.
NO WARRANTY; LIMITATION OF LIABILITY
THE HARDWARE DESIGNS, PLANS, DRAWINGS, INSTRUCTIONS, DOCUMENTATION, MATERIAL SPECIFICATIONS, DIMENSIONS, AND RELATED MATERIALS ARE PROVIDED "AS IS" AND "AS AVAILABLE," WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
WITHOUT LIMITING THE TERMS OF THE APPLICABLE LICENCES, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ALM MADE SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR OTHER LOSS, DAMAGE, INJURY, DEATH, COST, OR EXPENSE ARISING FROM OR RELATED TO THE USE, COPYING, MODIFICATION, MANUFACTURE, ASSEMBLY, SALE, DISTRIBUTION, OR PERFORMANCE OF THE DESIGNS OR DOCUMENTATION, INCLUDING WITHOUT LIMITATION LOSS OR DAMAGE RESULTING FROM DESIGN ERRORS, OMISSIONS, INCORRECT ASSEMBLY, UNSUITABLE MATERIALS, TOOL USE, PRODUCT FAILURE, PROPERTY DAMAGE, OR PERSONAL INJURY.
YOU ARE SOLELY RESPONSIBLE FOR EVALUATING THE DESIGNS, VERIFYING DIMENSIONS AND MATERIALS, DETERMINING SUITABILITY FOR YOUR INTENDED USE, FOLLOWING APPLICABLE SAFETY PRACTICES, AND COMPLYING WITH ALL APPLICABLE LAWS, REGULATIONS, CODES, STANDARDS, AND CERTIFICATION REQUIREMENTS.
NO RIGHTS TO TRADEMARKS OR BRANDING
The applicable licences do not grant permission to use or register the name "ALM Made," the domain name "almmade.com," any associated logos, trade names, service marks, trademarks, trade dress, or other branding.
You may not imply that a modified design, manufactured product, website, publication, or commercial offering is produced, approved, endorsed, certified, or affiliated with ALM Made unless you have separate written permission.
Use of the name "ALM Made" is permitted only where reasonably necessary to provide the attribution required by the applicable licence. Such attribution does not constitute endorsement.
MATERIALS AND DIMENSIONS
The plans identify materials by general material type, properties, and/or dimensions only. They do not require, recommend, or endorse any particular manufacturer, supplier, product line, trade name, or brand.
You are responsible for selecting materials that meet or exceed the specified characteristics and dimensions, including—where relevant—strength, stiffness, thickness, tolerances, temperature resistance, chemical compatibility, electrical properties, and other performance requirements.
Equivalent materials or products may be used only where they are suitable for the intended application and comply with the relevant specifications. Different materials, dimensions, manufacturing methods, or tolerances may alter the safety, performance, fit, durability, or legality of the result.
The identification of a material type or specification does not constitute an endorsement or warranty of any manufacturer, supplier, or product.
Last updated: 2026-09-17